Memory Management BSOD Error on Windows 10/11

BSOD error messages are fatal system errors caused by faulty software or faulty or incompatible hardware. A memory management error is an example of a typical BSOD error, and we’ll discuss several ways you can fix it when it occurs. When critical errors occur in Windows 10, a blue background (BSOD) message appears with important information. In particular, you can accurately determine the malfunction for further elimination by the system stop code.

The memory management error affects all Windows versions (Windows XP, Windows 7, Windows Vista, Windows 8.1, and Windows 10). This often happens when users run complex processes, such as complex games, virtual reality games, watching 4K broadcasts, etc. The system area controls your PC’s memory at different levels, including disk space and RAM. As a result, memory and processes are reallocated between RAM and physical memory during the execution of any tasks. The cache is released when you close the program and becomes available to other methods.

Unfortunately, this does not remove system errors from memory, which eventually lead to the BSOD screen.

The easiest and most common solution to this problem is to restart your computer.

After a reboot, you should no longer receive this error message. So before you try anything else, restart your computer and see if the issue has been resolved.

However, if the MEMORY MANAGEMENT error message still appears after restarting your computer, there are a few advanced troubleshooting methods you should try.

Just follow the instructions below.

Launch SFC Scanner

  • Right-click the start menu and go to the command prompt (administrator).
  • Type the following line at the command prompt and press Enter: sfc /scannow.
  • Wait for the process to finish (this may take a while) and see if any errors are fixed.
  • The SFC /SCANNOW command is a Microsoft tool for solving various system problems. Even if it doesn’t look like a real solution, many users who received this error said that the SFC /SCANNOW command solved the problem.
  • Run Windows Memory Diagnostic Tool > Go to search, type windows diagnostic tool, and open Windows Memory Diagnostic Tool > Select Restart Now and check for problems.
  • Let your computer restart. The next time you run the tool, it will tell you if something is wrong with your RAM.

If the SFC command did nothing and you still get this error message, there might be something wrong with your RAM. If your RAM is damaged, the best solution is to replace it with a new one.

But, before removing the current RAM, you must ensure it is broken. We recommend that you run the Windows Memory Diagnostic Tool. If it tells you that your memory is the problem, you can change it. Restore your computer to default settings if you have overclocked it.

BSOD errors are common on overclocked computers. If you increase your PC’s clock speed by running it faster than initially intended, you should run into several technical issues.

As a result, if you use multiple overclocking tools, try restoring your computer to default settings and check if this memory management warning persists.

  • Run a full system scan.
  • Go to Start > type defender > double click Windows Defender to launch the tool.
  • In the left pane, select the shield icon.
  • In the new window, click on the Advanced Scan option.
  • Check the “Full scan” box to start a full scan for system malware.

Malicious programs can cause various problems on your computer, including errors. Perform a full system scan to detect any malware running on your computer.

You can use WindowsBuilt-in Antivirus, Windows Protection, or third-party antivirus solutions.

Restore your registration

The easiest way to repair the registry is to use a dedicated tool like IObit Advanced System Care or CCleaner. Don’t forget to back up your registry in case something goes wrong.

You can also use the Microsoft System File Checker to check for system file corruption.

The utility checks the integrity of all protected system files and restores problematic files when possible. Here’s how to run an SFC scan:

  • Go to Start > type CMD > right click on Command Prompt > select Run as administrator.
  • Now enter the sfc /scannow command.
  • Wait for the scanning process to complete and restart your computer. All corrupted files will be replaced on reboot.
  • Update your operating system

Be sure to run the latest Windows operating system updates on your computer. As a quick reminder, Microsoft is constantly rolling out Windows updates to improve system stability and fix various issues.

To access the Windows Update section, you can type update into the search box. This method works on all Windows versions. Then go to Windows Update, check for updates, and install available updates.

Clean up your temporary files and folders

  • Go to Start > type Disk Cleanup > run the tool.
  • Select the drive you want to clean up > the tool will tell you how much space you can free up.
  • Select Clean up system files.

The easiest and fastest way to remove your temporary files and folders is to use Disk Cleanup. When you use a computer or surf the Internet, your computer accumulates various unnecessary files.

These so-called junk files can affect your computer’s processing speed, causing applications to respond slowly and cause various error codes, including a memory management error code.

Clean up temporary files and try rewriting data to the problematic storage device.

Check your drive for errors

On Windows 10, you can run Check Disk using the Command Prompt. Run command prompt as administrator and type chkdsk C: /f command followed by the Enter key. Replace C with the letter of your SSD partition.

As a quick reminder, if you don’t use the /chkdsk option, it displays a message that the file needs to be repaired but doesn’t fix any errors.

The command detects and fixes logical problems affecting your device. To fix physical issues, also run the /r option.

Remove recently installed software

If you have recently installed new software on your computer, try uninstalling it. Go to Start > type Control Panel > select recently added programs > click Uninstall.

Then restart your computer and see if the issue is resolved.

Check Programs Causing Memory Leaks

Check all processes on your computer to identify any programs causing memory leaks. To do this, start Task Manager and select the Processes column to see which applications use a significant amount of memory.

Select the appropriate process, click Last Task to disable it, and check if the error persists.

Manually increase virtual memory

  • Go to Home screen > enter advanced system settings > double click the first result.
  • Select the Advanced tab and click Configuration under the Performance panel.
  • In the new window, click on the “Advanced” tab and navigate to the Virtual Memory panel; from there, select Edit.
  • Clears Automatically manages paging file size for all box drives.
  • Click on Unit of measurement (volumetric mark) and select Regular size.
  • Add a new height in megabytes in the Initial Size (MB) or Maximum Size (MB) field, and then select Set.

By increasing virtual memory, you can solve memory problems or alerts. Of course, you will have to do it manually, as no applications are dedicated to this matter.

Run System Restore

  • Go to search > type system properties > Open System Properties.
  • Go to System Protection > click on System Restore.
  • Click Next > select your preferred restore point in the new window.
  • After selecting your preferred restore point, click Next > Finish.
  • Your computer will restart, and the recovery process will begin.

If the problem started recently, run System Restore. If this problem occurs after installing new software on your computer, this tool helps you uninstall recently added applications and programs.

The System Restore option allows you to restore the previous system configuration with good performance without losing files, except for some configurable features and options.

After completing the procedure, check if the problem is still there.

Windows 10 offers several advanced recovery options that allow users to clean and install the operating system. If you are a Windows 10 user, you can also use the “Reset this PC” recovery option.

  • Select Settings > Update & Security > click Recovery under the left pane.
  • Click “Start” when restarting this PC > select “Keep Files.”
  • Follow the instructions on the screen to complete the reset.


What happens when my computer crashes?

When your computer freezes, a fatal error has occurred in the system, caused by severe software problems, hardware failure, or incompatibility.

Are SSDs safer than HDDs?

SSDs are superior to HDDs in every way, as they can withstand extended periods of constant read and write processes and are more resistant to physical damage. The only benefit of having a hard drive is the price and the fact that they offer more storage space.

Although there is no definitive solution to fix BSoD, periodic maintenance and checks of systems and hardware upgrades can significantly reduce the chance of these errors occurring.

Did any solutions help you solve your Windows 10 memory management issue? Please write to us in the comments.